Arctic Cat BEARCAT 2015, Руководство оператора

Страница: 11 / 68

7
Cold Drive-Away
Function (5000)
On these models, there is a “cold drive-
away” function incorporated within the
engine.

NOTE: On models with a Standard
Gauge when cold-starting the
engine, the coolant temperature
warning icon will illuminate and the
readout screen will display TEMP.
With the engine in this temperature
range, the RPM “limit” of the engine
will be below drive system engage-
ment speed. As the engine warms,
the TEMP display will go out, the
coolant temperature warning icon
will begin to flash, and the RPM
“limit” of the engine will increase
allowing the snowmobile to move
without full-throttle operation. When
the engine reaches proper operating
temperature, the coolant tempera-
ture warning icon will go out.

NOTE: On models with a Deluxe
Gauge when cold-starting the engine,
the coolant temperature warning icon
will illuminate and the TEMP display
on the readout screen will begin to
flash. With the engine in this tempera-
ture range, the RPM “limit” of the
engine will be below drive system
engagement speed. As the engine
warms, the coolant temperature warn-
ing icon will begin to flash, the TEMP
display will continue to flash, and the
RPM
“limit” of the engine will
increase allowing the snowmobile to
move without full-throttle operation.
When the engine reaches proper
operating temperature, the coolant
temperature warning icon and the
TEMP display will go out
.
Speedometer/
Tachometer/Indicator
Icons
These snowmobiles are equipped with
different speedometer/tachometer styles.
Determine which style your model is
equipped with and use the appropriate
following information.
Standard Gauge
Certain models are equipped with a stan-
dard gauge combination speedometer/
tachometer. Indicator icons are incorpo-
rated within the speedometer/tachome-
ter.
Also incorporated into the
speedometer/tachometer is a digital read-
out screen.
FZ003C
RPM/MPH (kph)
By pushing the left button once, the RPM
and MPH will be displayed (one on the
readout screen and one with the needle).
By pushing the button once again, the
functions will be reversed.
By pushing the left button (with speed
being displayed) for more than two sec-
onds, the display will change between
standard mph or metric kph. Release the
button when desired display appears.
CAUTION
Never run the engine with the drive
belt removed. Excessive revving of
the engine could result in serious
engine damage and drive clutch fail-
ure.
CAUTION
It is extremely important that the
engine is properly warmed up before
subjecting the engine to high speed
operation or heavy loads. The engine
should be allowed to idle at least 3-4
minutes before it is operated at more
than 1/2 throttle. In extremely cold
conditions, the warm-up time will be
longer. Cold seizure and piston scuff-
ing caused by insufficient warm-up
will not be covered by warranty. Also,
do not idle the engine for excessively
long periods of time.