manualshive.com logo in svg

Arctic Cat 500H1, Руководство по обслуживанию

Поделиться
Скачать
Arctic Cat 500H1 Скачать руководство пользователя страница 16

2-6

CF143A

3. On all models except the 400, raise the storage

compartment cover; then slide the cover forward

and off the compartment. Remove the storage

compartment.

CD669

4. Unsnap the four spring-clip fasteners (400/500/H1

Models) or remove two wing-nuts (700 EFI); then

remove the air filter cover.

CD675A

FI033

5. Remove the air filter element/screen assembly and

separate the element from the screen.

6. Fill a wash pan larger than the element with a

non-flammable cleaning solvent; then dip the ele-

ment in the solvent and wash it.

„

NOTE: Foam Air Filter Cleaner and Foam Air Fil-

ter Oil are available from Arctic Cat.

7. Dry the element.

8. Put the element in a plastic bag; then pour in air

filter oil and work the oil into the element. Attach

the element to the filter screen.

9. Clean any dirt or debris from inside the air cleaner.

Be sure no dirt enters the carburetor (if equipped).

10. Place the filter assembly in the air filter housing

making sure it is properly positioned and properly

seated with the filter screen down.

CD674

11. Install the air filter housing cover and secure with

the retaining clips (400/500/H1 Models) or

wing-nuts (700 EFI).

12. Install the storage compartment; then secure with

the reinstallable rivets.

! CAUTION

A torn air filter element can cause damage to the
ATV engine. Dirt and dust may get inside the engine
if the element is torn. Carefully examine the element
for tears before and after cleaning it. Replace the ele-
ment with a new one if it is torn.

Back to TOC

Back to Section TOC

Next

Back

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983

www.mymowerparts.com

Содержание 500H1




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды