DIV
ISION
II -
OPER
A
T
ION
/
MAINTENANC
E
77
3. Tighten the knurled nut against the
throttle cable adjuster securely; then
slide the rubber boot over the adjuster.
Engine Idle RPM
Adjustment (400)
NOTE: Idle RPM is not adjustable
on the EFI models.
To properly adjust the idle, a tachometer
is necessary.
NOTE: If a tachometer is not avail-
able, take the ATV to an authorized
ATV dealer for this procedure.
NOTE: The idle adjustment
screw is located on the right-hand
side of the carburetor.
AF920C
1. Start the engine and warm it up to
normal operating temperature.
2. Turn the idle adjustment screw in or out
until the engine idles 1250-1350 RPM.
Air Filter
The air filter inside the air filter housing
must be kept clean to provide good
engine power and gas mileage. If the
ATV is used under normal conditions,
service the filter at the intervals speci-
fied. If operated in dusty, wet, or muddy
conditions, inspect and service the filter
more frequently. Use the following pro-
cedure to remove the filter and inspect
and/or clean it.
1. Remove the reinstallable rivets at
the rear of the steering post cover;
then unlatch the storage compart-
ment lid.
CF260A
2. Lift up on the rear of the steering
post cover and slide the storage com-
partment cover assembly forward to
disengage the mounting lugs; then
lift and remove the cover assembly
from the storage compartment.
FI467
3. Lift out the storage box; then unsnap
the four spring-clips and remove the
air filter cover.
FI468
! WARNING
Engage the brake lever lock and place
the shift lever in the N (neutral) posi-
tion when making idle RPM adjust-
ments.
CAUTION
Failure to inspect the air filter fre-
quently if the ATV is used in dusty,
wet, or muddy conditions can dam-
age the engine.
Содержание 2013 1000 TRV
Страница 89: ...87 Maintenance Record DATE MILEAGE SERVICE PERFORMED NOTES ...
Страница 90: ...88 NOTES ...