72
PR376B
4. Install the wheel and tighten using a
crisscross pattern in 20 ft-lb incre-
ments to 40 ft-lb (steel wheels) or 80
ft-lb (aluminum wheels).
Rear Foot Brake
The rear foot brake must be properly
maintained to be fully functional.
1. Check the brake fluid level in the res-
ervoir. The fluid level must be main-
tained between the MAX and MIN
level marks. If the level in the reser-
voir is low, add DOT 4 brake fluid.
CD474A
NOTE: The brake fluid reservoir
is located on the electrical panel
beneath the operator’s seat.
2. Press the rear foot brake several
times to check for firmness.
3. If the brake is not firm, the system
must be bled.
NOTE: Take the ATV to an autho-
rized Arctic Cat ATV dealer for this
service.
Protective Rubber
Boots
The protective boots should be inspected
periodically according to the Mainte-
nance Schedule.
Ball Joint Boots (Upper
and Lower/Right and Left)
CC791
1. Secure the ATV on a support stand
to elevate the front wheels.
2. Remove both front wheels.
3. Inspect the four ball joint boots for
cracks, tears, or perforations.
4. Check the ball joint for free-play by
grasping the steering knuckle and
turning it from side to side and up
and down.
5. If boot damage is present or ball
joint free-play seems excessive, con-
tact an authorized Arctic Cat ATV
dealer for service.
Tie Rod Boots (Inner and
Outer/Right and Left)
CC792
1. Secure the ATV on a support stand
to elevate the front wheels.
2. Remove both front wheels.
! WARNING
Be sure to inspect the rear foot brake
system before each use. Always
maintain brakes according to the
Maintenance Schedule.
Содержание 2013 1000 TRV
Страница 89: ...87 Maintenance Record DATE MILEAGE SERVICE PERFORMED NOTES ...
Страница 90: ...88 NOTES ...