Arconic Marson M38980, Инструкция по эксплуатации

Страница: 8 / 12

Technical specifications
Battery-powered MARSON BT-3 electric riveting machine
For processing blind rivets with pole cross-sections of 5/64” - 3/16”
in all materials
• Weight: 3.6 lb (without battery)
• Stroke: 30 mm
• Engine: 20 V Brushless DC motor
• Installation force: 20,000 N
• CE according to EU regulation No. 2006/42/EG
Quick-replacement of the rechargeable battery
• Nominal voltage: 20 V
• Capacity: Li-Ion 2.0 Ah (5 cells)
• Weight: 0.77 lb
Operational description
Depicted components
The numbering of the components in the picture refers to the picture of the electric riveting machine
A) Nosepiece
B) Frame head
C) Failure indication
D) Mandrel collector
E) Trigger
F) Riveting area illumination
G) Battery with capacity indicator
H) Battery locking switch
*** The components depicted or described are not part
of the default scope of delivery. You can find all accessories
in our accessory program.
Charging the battery
Note: The battery is partially charged on delivery.
To guarantee full power of the battery, charge it completely in the charger before first use. Pay attention to the charge indicator on the charging
device. The Li-Ion battery can be recharged at any time without affecting its fatigue life. Interrupting the charging process doesn’t damage the battery.
The battery is equipped with a temperature monitoring system which only allows for charging between 32°F and 113°F. Please consider the notices
for disposal.
Removing the battery
The battery (G) is equipped with a locking mechanism (H). As long as the battery remains inside the electric riveting machine it is held in position
by a spring. To remove the battery (G), press the unlocking button (H) and pull the battery from the electric riveting device. Don’t use force.
Putting the device into operation
Insert the battery. Only use original MARSON BT-3 Li-Ion batteries with the voltage of 20 V depicted on the type label of your electric riveting machine.
The use of other batteries may lead to injuries and risk of fire. Push the battery (G) from the front into the stand of the electric riveting machine,
holding the locking button (H) pressed. Push the battery into the stand completely until it is securely locked.
Charging device
• Input voltage: 100-240 V / 50-60 Hz
• Output voltage: 9-21V
• Output current: max. 4 A
• Recharging time: ~30 minutes
• Weight: 1.21lb
Data on noise and vibrations
• Noise emission: LPA = 78.8 dB
• Uncertainty: K = 3 dB
• The noise level during operation can exceed 80 dB(A)
• Use ear protectors!
• Vibrations: <2.5 m/s2
Total weight (including 1x 2.0 Ah battery, charging
device and packaging): 12.5 lb
Configurations with power plugs for worldwide use
are available (CE/ECM/UL/ETL/CB/SAA)
A
B
E
F
G
D
C
H