Arconic Marson M38980, Инструкция по эксплуатации

Страница: 6 / 12

Security advice
General security advice for electric riveting machines.
Please read all security advice and instructions. Failure to comply with the security advice and the instructions can lead to electric shock,
fire and/or serious injuries.
Please preserve all security advice and instructions for future reference.
The term “electric riveting machine” used in the security advice refers to the line-powered MARSON BT-3 charger (with power cord)
and to the battery-powered MARSON BT-3 riveting machine (without power cord).
1. Workspace safety
a) Keep your workspace in a clean condition and provide sufficient lighting.
Messy or insufficiently illuminated work areas can lead to accidents.
b) Do not operate the electric riveting machine in an environment with risk of explosions which contains flammable liquids,
gases or dust. Electric riveting machines create sparks which can inflame the dust or the vapors.
c) Keep away children and other persons while operating the electric riveting machine.
In case of distraction you can lose control of the machine.
2. Electric safety
a) The connector plug of the electric riveting machine has to fit into the power socket.
The plug must not be modified in any way. Do not use adapter plugs together with protectively grounded electric riveting machines.
Unchanged plugs and fitting sockets reduce the risk of electric shocks.
b) Avoid body contact with grounded surfaces like pipes, heaters, cookers and refrigerators.
If your body is grounded, an increased risk of electric shock persists.
c) Do not expose electric riveting machines to rain or humidity. Water entering an electric riveting machine increases the risk of electric shock.
d) Do not misuse the cable to carry or hang up the electric riveting machine or to pull the plug from the socket.
Do not expose the cable to heat, oil, sharp edges and moving device parts. Damaged or entwined cables increase the risk of an electric shock.
e) If you are using the electric riveting machine outside, only use extension cords suitable for outside use.
The use of an extension cord suitable for outside use reduces the risk of electric shock.
f) If the use of the electric riveting device in a wet environment is unavoidable, use a fault-current circuit breaker.
The use of a fault-current circuit breaker reduces the risk of electric shock.
3. People safety
a) Stay alert, be careful with your actions and use the electric riveting machine in a reasonable way.
Do not use the electric riveting machine if you are tired or under the influence of alcohol, drugs or medication. A momentary inattentiveness
while using the electric riveting machine can lead to serious injuries.
b) Wear protective clothing and always wear protective goggles. Wearing protective clothing like a dust mask, skid-proof safety shoes, a
protective helmet or ear protectors (depending on the conditions and aims you use the electric riveting machine for) reduces the risk of injuries.
c) Avoid inadvertent start ups of the machine. Make sure that the electric riveting machine is turned off before you connect it to the electric
supply and/or to the battery, while picking it up or carrying it. Holding your fingers close to the power switch when carrying the electric riveting
machine or connecting it to the power supply while it is turned on may lead to injuries.
d) Remove adjusting tools and screwdrivers before switching on the electric riveting machine.
A tool or screwdriver placed into a rotating part of the device can lead to injuries.
e) Avoid unnatural body positions. Ensure you are standing firmly and always preserve your balance.
This way you can better control the electric riveting machine, should an unexpected situation occur.
f) Wear appropriate clothes. Do not wear large clothes or jewelry. Avoid putting your hair, clothes and gloves close to the moving parts
of the device. Wide clothing, long hair and jewelry can be caught up in the moving parts.
g) If the mandrel collection devices can be mounted, make sure that they are connected and used correctly.