background image

Arconic Inc. (NYSE: ARNC) creates breakthrough products
that shape industries. Working in close partnership with our
customers, we solve complex engineering challenges to
transform the way we fly, drive, build and power. 
Through the ingenuity of our people and cutting-edge
advanced manufacturing, we deliver these products at a
quality and efficiency that ensures customer success and
shareholder value.

Arconic Fastening Systems Tooling Support Locations

Huck provides technical assistance

regarding the use and application of Huck

fasteners and tooling. NOTICE: The

information contained in this publication is

only for general guidance with regard to

properties of the products shown and/or

the means for selecting such products,

and is not intended to create any warranty, express,

implied, or statutory; all warranties are contained only in

Huck’s written quotations, acknowledgments, and/or

purchase orders. It is recommended that the user secure

specific, up-to-date data and information regarding each

application and/or use of such products.

CERTIFIED

MANAGEMENT

SYSTEM

ISO 9001-2015

ISO 14001-2015

© 2018 Huck International, Inc.

Arconic Fastening Systems
Kingston Operations

1 Corporate Drive, Kingston, NY 12401
Tel: 800-431-3091 • Fax: 845-334-7333 

www.afshuck.net/us

INDUSTRIAL NORTH AMERICA

Kingston Operations
1 Corporate Drive
Kingston, NY 12401
Tel: +1-800-278-4825
Fax: +1-845-334-7333
[email protected]

Tracy Operations (IDG) 
1925 North MacArthur Drive
Tracy, CA 95376
Tel: +1-800-826-2884
Fax: +1-800-573-2645
[email protected]

Waco Operations
PO Box 8117
8001 Imperial Drive
Waco, TX 76714-8117
Tel: +1-800-388-4825
Fax: +1-800-798-4825
[email protected]

INDUSTRIAL GLOBAL

Kolkata Operations 
Unit No. 28, 2nd Floor,
55/1, Chowringhee Road, 
Kolkata 700071, West Bengal, India
Tel: +91-33-40699170 
Tel: +91-33-40699180
Fax +91-33-40699184

Melbourne Operations
1508 Centre Road
Clayton, Victoria 
Australia  3168
Tel: +613-8545-3333
Fax: +613-8545-3390
[email protected]

São Paulo Operations
Rodovia Anhanguera, s/n, KM 17 
Parque São Domingos  - Complexo
Anhanguera  - Galpão 1 Seção III
(Módulo III) Box 11
CEP 05112-000  São Paulo – SP Brazil 
Tel: +55-11-3583-7061

Suzhou Operations
58 Yinsheng Road, 
SIP Suzhou, Jiangsu
215126   China
Tel: +86-512-62863800-8888

Telford Operations
Unit C, Stafford Park 7
Telford, Shropshire
England TF3 3BQ
Tel: +44-(0)-1952-290011
Fax: +44-(0)-1952-207701
[email protected]

Tokyo Operations (Japan and Korea)
1013 Hibiya U-1 Bldg.
Uchisaiwai-cho 1-1-7
Chiyoda-ku, Tokyo 
100-0011   Japan
Tel: +81-3-3539-6594
Fax: +81-3-3539-6585

AEROSPACE NORTH AMERICA

Kingston Operations
1 Corporate Drive
Kingston, NY 12401
Tel: +1-800-278-4825
Fax: +1-845-334-7333
[email protected]

Simi Valley Operations
3990A Heritage Oak Court
Simi Valley, CA 93063 
Tel: +1-805-527-3600
Fax: +1-805-527-0900 
www.afs-simivalley.com

AEROSPACE GLOBAL

Aichach Operations 
Robert-Bosch Str. 4
Aichach 86551 
Germany
Tel: +49-8251-8757-0
[email protected]

Cergy Operations
15 Rue du Petit Albi
F-95611 Cergy Pontoise
France
Tel: +33-1-34-33-98-00
Fax: +33-1-34-33-97-77

Hong Kong Operations
27th Floor, 88 Hing Fat Street
Causeway Bay
Hong Kong, China
Tel: +852-2864-2012

Содержание 2480 series





















Отзывы: