ArchWork ARCLINEA36TRI, Руководство пользователя

Страница: 22 / 32

ARCLINEA36TRI
6
- 3 - FUNCTIONS AND SETTINGS
3.1 Operation via ARCMAT controller
After making the connection ARCLINEA36TRI supply (230V ~ 50Hz), connect the unit to the external con-
troller ARCMAT through the signal cable.
(For more information on the operation of the controller ARCMAT consult the instruction manual).
1
3
2
DMX - OUTPUT
XLR socket
Pin1 : GND - Shield
Pin2 : - Negative
Pin3 : + Positive
Pin1: GND - Shield (Black)
Pin2: - Negative (Green)
Pin3: + Positive (Red)
SIGNAL CONNECTOR
NOTE
• Connect the DMX coder to the units in series.
• All connected units will be set with the same information.
• Set corresponding DMX address, Personality, Calibration and Dimmer of fixture through the DMX coder.
• A maximum of 20 units in series can be set by the DMX Coder at the same time.
Power
............
ARCMAT