OPTIMA PS1 PELLET STOVE
5
5
SAFETY NOTE:
If this stove is not properly installed, a house fire may result. For your
safety, follow the installation instructions, vent manufacturer’s instructions, contact local
building, fire officials, or authority having jurisdiction about restrictions and installation
inspection requirements in your area.
The authority having jurisdiction should be consulted before installation to determine
the need to obtain a permit.
WHEN LOCATING YOUR STOVE:
Consider safety, convenience, traffic flow, and the
fact that the stove will need a chimney and chimney connector. It is a good idea to plan
your installation on paper, using exact measurements for clearances and floor
protection, before actually beginning the installation.
These installation instructions describe the installation and operation of the OPTIMA
PS1 pellet stove. This stove meets the U.S. Environmental Protection Agency’s
emission standards. The Optima PS1 is listed by Warnock Hersey Test Laboratories,
Inc. to ASTM E1509-04. The Optima PS1 is approved for mobile home installation ( in
the US and Canada) when not installed in a sleeping room and when an outside
combustion air inlet is provided. The structural integrity of the mobile home floor,
ceiling, and walls must be maintained. The stove must be properly grounded to the
frame of the mobile home. See instructions for connecting the stove to get outside
combustion air.
SAFETY LABEL
A copy of the label that accompanies each Archgard Optima PS1 pellet stove is printed
on the next page for your convenience.
NOTE:
Archgard units are constantly being improved. If there is a conflict between the
label on the unit and the one printed here, the label on the unit is the correct one. The
safety label is located on the underside of the hopper lid.
YOUNG CHILDREN SHOULD BE CAREFULLY SUPERVISED WHEN
THEY ARE IN THE SAME ROOM AS THE STOVE.