ARCHEAN Audio ACCESSIBILITE DCSTS-K015 Скачать руководство пользователя страница 5

5

Product Overview

Components

Speech transfer systems provide assistance for clear communication where 

normal speech is impaired by use of glass, a security screen or other similar 

barriers.
There is also a hearing loop facility included which provides additional assistance 

for hearing device wearers.

1.  Adhesive Clip x10

2.  No.6 x 1/2” Countersunk Screws x15

3.  P-Clips x6

Also included is a Fixing Kit, which contains:

1.  Installation and User Manual                        

2.   A31H Amplifier                                    

3.   Overhead Speakers (for models  

  K015 and K062), or a  Surface   

  Mount speaker for model K058.             

4.  Bent Vandal-Proof Microphone  

  (for model K058) or a straight   

  stem Microphone for models K015  

  and K062                         

5.  Staff Mic Unit (for models K015  

  and K062) or a Staff Loudspeaker  

  unit for model K058                    

6.  Hearing Loop Sticker

7.  IEC Lead

8.  Hearing Loop Aerial

9.  Power Supply

10. Mounting Bracket

Содержание Audio ACCESSIBILITE DCSTS-K015























Отзывы: