10
Installation Instructions STS-K062
Staff Microphone, Amplifier and Overhead Loudspeaker
1. Place the staff microphone on the staff side of the counter/checkout,
ensuring that it does not cause an obstruction and is as close to staff as
possible.
2. Place the amplifier under the staff counter/checkout, ensuring that it will not
obstruct staff when they are sitting.
3. Mark the 4 fixing points for the
amplifier under the counter.
4. Drill and fix the amplifier in place using
the supplied screws.
5. Use the cable management hole to run
the staff microphone cable back to the
amplifier. If there is not already a cable
management hole, one will need to be
drilled in a suitable location near the
rear of the counter/checkout.
6. Install the overhead loudspeakers:
a. Find a location on the staff sidedirectly above the pass-through tray.
Ensure there is sufficient space and there is no glass behind where you
want to drill.
b. Check the cable route to the amplifier situated under the counter/
checkout. Ensure access through the counter/checkout and suitable
cable length.
c. Mark 2x fixing points and 1x cable hole to attach the overhead speakers.
Fixing points
