13
Installation Instructions STS-K058
Install the Staff Loudspeaker unit, Amplifier and Bent Vandal-Proof Microphone
in the order described below. If you have followed the steps closely and the
system is not functioning as intended, consult Troubleshooting on page 21.
Staff Loud Speaker Unit and Amplifier
1. Place the Staff Loudspeaker Unit on the staff side of the counter top,
ensuring that it does not cause an obstruction and is as close to staff as
possible.
2. Place the amplifier under the staff counter, ensuring that it will not obstruct
staff when they are sitting.
3. Mark the 4 fixing points for the amplifier under the counter.
4. Drill and fix the amplifier in place using the supplied screws.
5. Use the cable management hole to run the Staff Loudspeaker Unit cable
back to the amplifier. If there is not already a cable management hole, one
will need to be drilled in a suitable location near the rear of the counter.
