arcelik 9771I DGI, Руководство пользователя

Страница: 29 / 31

29 | EN
Catalytic walls
Side walls or just back wall of oven
interior may be covered with catalytic
enamel.
The catalytic walls of the oven must
not be cleaned. The porous surface of
the walls is self-cleaning by absorbing
and converting spitting fat (steam and
carbon dioxide).
Clean oven door
Don't use any harsh abrasive cleaners
or sharp metal scrapers for cleaning
the oven door. They could scratch the
surface and destroy the glass.
Removal of oven door
1. Open the front door.
2. Open the clips at the hinge housing
on the right and left hand sides of
the front door by pressing them
down as illustrated in the figure.
1 Front door
2 Hinge
3 Oven
3. Move the front door to half-way.
4. Remove the front door by pulling it
upwards to release it from the right
and left hinges.
NOTICE
Steps carried out during
removing process should be
performed in reverse order (steps
4, 3, 2 and 1) to reattach the
door. Do not forget to close the
clips at the hinge housing when
reinstalling the door.
Replacing the oven lamp
DANGER
Hot surfaces may cause burns!
Make sure that the appliance is
switched off and cooled down in
order to avoid the risk of an
electrical shock.
Important
The oven lamp is a special
electric light bulb that can resist
up to 300 °C. See
Technical
specifications, page 5
for details.
Oven lamps can be obtained
from Authorised Service Agents.