arcelik 270561EB, Руководство пользователя

Страница: 48 / 72

10 /39EN
Refrigerator / User Guide
4 Installation
4.1. Right place for installation
Contact the Authorized Service for the
product's installation. To ready the product
for installation, see the information in the
user guide and make sure the electric and
water utilities are as required. If not, call an
electrician and plumber to arrange the utilities
as necessary.
B
WARNING:
The manufacturer
assumes no responsibility for any
damage caused by the work carried
out by unauthorized persons.
B
WARNING:
The product’s power
cable must be unplugged during
installation. Failure to do so may result
in death or serious injuries!
A
WARNING:
If the door span is too
narrow for the product to pass,
remove the door and turn the product
sideways; if this does not work,
contact the authorized service.
• Place the product on a flat surface to avoid
vibration.
• Place the product at least 30 cm away from
the heater, stove and similar sources of heat
and at least 5 cm away from electric ovens.
• Do not expose the product to direct sunlight
or keep in damp environments.
• The product requires adequate air
circulation to function efficiently.
• If the product will be placed in an alcove,
remember to leave at least 5 cm distance
between the product and the ceiling and the
walls.
• Do not install the product in environments
with temperatures below -5°C.
•
Your product requires adequate air
circulation to function efficiently. If
the product will be placed in an alcove,
remember to leave at least 5 cm clearance
between the product and the ceiling, rear
wall and the side walls.
•
If the product will be placed in an
alcove, remember to leave at least 5
cm clearance between the product and
the ceiling, rear wall and the side walls.
Check if the rear wall clearance protection
component is present at its location
(if provided with the product). If the
component is not available, or if it is lost
or fallen, position the product so that at
least 5 cm clearance shall be left between
the rear surface of the product and the
wall of the room. The clearance at the rear
is important for efficient operation of the
product.
4.2. Adjusting the stands
If the product is not in balanced position,
adjust the front adjustable stands by
rotating right or left.
A
Read the “Safety Instructions” section
first!