Safety instructions
4 /39EN
Refrigerator / User Guide
A
1.3 - Electrical safety
•
The product must be unplugged during
installation, maintenance, cleaning,
repairing and moving procedures.
•
If the power cable is damaged, it
must be replaced by a qualified
person specified by the manufacturer,
authorised service agent or importer in
order to avoid potential dangers.
•
Do not squeeze the power cable
under or behind the product. Do not
place heavy objects on the power
cable. Power cable must not be bent
excessively, pinched or get in contact
with any heat source.
•
Do not use extension cords, multi-
sockets or adapters to operate the
product.
•
Portable multi-sockets or portable
power sources can overheat and cause
fire. Therefore, do not keep any multi-
sockets behind or near the product.
•
Plug must be easily accessible. If
this is not possible, the electrical
installation to which the product is
connected must contain a device
(such as a fuse, switch, circuit breaker,
etc.) which conforms to the electrical
regulations and disconnects all poles
from the grid.
•
Do not touch the power plug with wet
hands.
•
Remove the plug from the socket by
gripping the plug and not the cable.
A
1.4 - Transportation safety
•
Product is heavy; do not move it alone.
•
Do not hold its door when moving the
product.
•
Pay attention not to damage the
cooling system or the piping during
transportation. If the piping is
damaged, do not operate the product
and call the authorised service agent.
A
1.5 - Installation safety
•
Call the authorised service agent for
installation of the product. To make
the product ready for use, check the
information in the user manual to
make sure that the electricity and
water installations are suitable. If they
are not, call a qualified electrician
and plumber to have the necessary
arrangements made. Otherwise,
there is the risk of electric shock, fire,
problems with the product, or injury!
•
Prior to installation, check if the
product has any defects on it. If the
product is damaged, do not have it
installed.
•
Place the product on a clean, flat
and solid surface and balance it
with adjustable feet. Otherwise,
the product may tip over and cause
injuries.
•
The installation location must be
dry and well ventilated. Do not place
carpets, rugs or similar covers under
the product. Insufficient ventilation
causes the risk of fire!
•
Do not cover or block the ventilation
openings. Otherwise, power
consumption increases and your
product may get damaged.
•
Product must not be connected to
supply systems such as solar power
supplies. Otherwise, your product may
get damaged due to sudden voltage
changes!
