5
www.ts-market.com
Adding Cell to “White List”
By creating a "white list" of non-dangerous signals, you increase the speed of "ARCANE" in the search
mode for newly appearing video camera signals. After the power is turned off, the "white list" is
automatically erased and when a new search is made, such signals will again become "red".
To move the cameras to the "white" list from the home screen, first touch the
selected cell with your finger or stylus (it is highlighted with a white border),
and then click on the
"W"
button – the cell with information automatically
moves to the second page of the screen and turns green.
The device provides a mode for automatically transferring all currently
detected signals to the "white" list. To do this, on the main screen, without
selecting a specific cell, press the
"W"
button. You will be asked to start the
automatic detection mode and transfer signals to the "white" list.
In order for the information about the "non-dangerous signals" to be saved
after switching off, it must be written to the long-term flash memory of the
device.
To do this, select a single cell (highlighted with a
white border) and press the "ROM" button, you will
be asked to write the information to the internal
memory of the device. The stored cell will be
displayed with the "*" icon. Pressing the "W" button-
returns the information back to the home screen.
IMPORTANT TO KNOW!
Information from the "ARCANE" Flash memory is automatically erased when
updating the firmware!
