4
www.ts-market.com
The main screen consists of two pages in the form of tables with cells
The battery level is displayed in the upper-right corner of the screen, the current position of the device's
operating mode is in the center, and the screen page designation is on the left. The active buttons are
located at the bottom of the screen
On first page
displays information about the video
cameras found by the device and the detected signals.
On second page
displays information about devices
that are included in the “white” list of non-dangerous
signals.
Switching of pages
is made by the button in the lower
right corner of the screen.
Information About ETH Signals of Digital Sources
The detected signals emitted from devices, which are using Ethernet protocol
(IP cameras, computers, Wi-Fi routers, switches and other peripheral devices)
are grouped in the “ETH” cell (the cell is colored in red).
To view the list of detected signals, press and hold for two seconds with your
finger or stylus on the
“ETH”
cell.
Search for Video Cameras and Signal Sources Detected by the Device
Press and hold the selected table cell for two seconds with your finger or
stylus, and a multi-colored scale (column) with the signal level will appear on
the screen. To the left of the scale, information about the signal is displayed.
Moving with the device around the room (territory), achieve the maximum
readings of the received level. Find and identify the source of the signal.
If the source is “non-dangerous”, move it to the “white list” by pressing the
“W”
button. To return to the main screen, press the
“X”
button.
