![background image](http://html1.mh-extra.com/html/arcam/fmj-udp411/fmj-udp411_handbook_2963635011.webp)
E-21
E-20
English
Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
specifications
Analogue Audio Output
Digital to Analogue conversion
24-bit 192kHz Delta-Sigma DAC
Signal to noise ratio
110dB CCIR
Harmonic distortion (1kHz)
0.002%
Frequency response (±0.5dB)
10Hz–20kHz
Output level (0dB)
2.2Vrms
Output impedance
47Ω
Minimum recommended load
5kΩ
Video Outputs
HDMI
19-pin HDMI connector Supported video formats are: 720 x 576p,
720(1440) x 576i, 720 x 480p, 720(1440) x 480i, 1280 x 720p, 1920
x 1080i, 1920 x 1080p, 3840 x 2160p. Audio to 8-channel/96kHz or
2-channel/192kHz (24-bit).
Digital interfaces
USB
USB 2.0 High Speed (480 Mbit/s)
Network
10 BASE-T / 100 BASE-TX
Physical
Dimensions
W433 x D400 x H100mm
Weight
6.2kg nett/8.5kg packed
Power consumption
20W maximum
Digital output connection
75Ω co-axial optical TOSLINK
Supplied accessories
Mains lead CR301 remote control 2 x AAA batteries
Wi-Fi antenna
E&OE
NOTE
: All specification values are typical unless otherwise stated
Radio interference
The UDP411 Blu-ray Disc player is a digital device
which has been designed to very high standards of
electromagnetic compatibility.
All Blu-ray players generate, and can radiate RF
(radio frequency) energy. In some cases this can cause
interference with FM and AM radio reception. If this is
the case, keep the player and its connecting cables as far
from the tuner and its aerials as possible. Connecting
the player and the tuner to different mains sockets can
also help to reduce interference.
EC COUNTRIES – This products have been designed to
comply with EMC Directive 2004/108/EC.
USA – These products comply with FCC Part 15 Class B.
Laser radiation
If the UDP411 Blu-ray Disc
player is operated whilst
the outer casing is removed,
invisible laser radiation could
cause eye damage.
CLASS II
LASER PRODUCT
audio
& video
output
formats
Audio output format
The audio output format available from the digital audio
outputs depends on the soundtrack format being played,
the audio output in use and the
Digital Out
setting in
the
Audio
settings menu: see ‘Audio’ on page E-17.
Use the flowchart on this page to guide you to the
correct setting for your home cinema setup.
Use “PCM 5.1”
START
Do you use an AV receiver?
Use “PCM Stereo”
Do you connect
audio using Optical or
Coaxial Digital?
Do you have a 7.1-format
surround sound speaker
system?
Do you have a surround
sound speaker system?
Use “PCM Stereo”
Use “PCM 5.1”
Use “PCM 7.1”
Use “Bitstream Re-encode”
Do you connect audio using
HDMI?
Is your receiver HDMI1.3
compatible (Dolby
TrueHD/DTS HD)?
Do you want to play
back Secondary Audio
from Blu-ray Discs?
Use “Bitstream HD”
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES