![background image](http://html1.mh-extra.com/html/arcam/diva-dv88/diva-dv88_service-manual_2963702021.webp)
CONFIDENTIAL
NOT FOR DISCLOSURE TO THE PUBLIC
Market Options
DVD -Video has been designed to incorporate regional coding for software copyright reasons,
whereby the player is set to permit the replay of only discs from the region in which it has been
marketed and sold. The region coding to which the DV88 has been factory set is marked on its
rear panel. If a user tries to play a disc from a non matching region, then the player will refuse
to play it and the words A invalid region A will appear on the on-screen display.
Occasions will arise where customers wish to move from one continent to another and to play
DVDs purchased in the new regional area on his or her DV88. For such customers it is possible
to change the DV88's regional code setting and default video standard using the supplied CR-
314 remote control. The procedure is set out below.
It is important to keep this information confidential in order to comply with the terms
of the DVD CSS ( Content Scramble System ) licence.
Region Change
Open the tray, enter 1,1,1,1 on the remote, then enter a 2 digit number from 01 to12 for the DVD
region 1 to 12. This will only set the DVD disc region the unit will play, it will not change the video
parameters.
Market Options
Open the tray, enter 1,2,3,4 on the remote, then enter a 2 digit number from 01 to12 for the Arcam
region 1 to 12. This sets parameters such as DVD region, video standard.
We have defined several >Arcam shipping regions= which are explained in the following table. Note
that the video parameters will be changed.
How to check which software and firmware the player has.
1:Switch both the TV/ Projector and DVD Player on so the Arcam Screen Saver can be viewed.
2:Press the "Set Up" button on the remote control.
3:Key in the following numbers, 4 7 9 2 this will then put the player into the
Engineering Menu
.
4:Place the cursor over "Version" and hit "OK" on the remote control.
5:The players current software and firmware version will then be displayed.
6:Hit "OK" to go back to the
Engineering Menu
and "Set Up" to exit.
N.B. In the
Engineering Menu
a Self Test can be performed as well, please note that not all items may
have a tick against. This indicates the lack of a Progressive Scan Module and not a player fault. Please
exit menu and re-boot player before operating.
The software version and Arcam shipping region are displayed on the TV screen at power up.
Voltage Settings
For 115/230 VAC operation this is set by the selector switch on the back of the unit.
For 100 VAC units a different transformer is fitted.
Содержание DiVA DV88
