4
VCR Device Mode
The
w
Device Mode button selects
VCR
as the source.
The VCR page allows code learning from a dedicated
VCR remote – see “customising the CR402” on page
7.
DVD Device Mode
The
d
Device Mode button configures the CR402 to
control the functions of Arcam DVD and Blu-ray Disc
players, although this can be changed. Pressing this
button also selects
DVD
as the source.
P
Toggles power between standby and on.
EQ
!
Open/close disc tray.
0
…
9
Searches for and plays the track
corresponding to the key pressed when
playing CD.
D
Cycles through the front panel display’s
brightness options.
RPT
M
Cycles through the repeat options (track,
disc, etc).
FAV+
)
Fast rewind
FAV–
(
Fast forward
TRIM
Y
Press and release to skip back to the
beginning of the current/previous track.
DIRECT
Z
Press and release to skip forwards to the
beginning of the next track.
Stereo direct on/off. Provides a direct
analogue path from the analogue inputs to
the left and right front outputs. Switches off
any surround processing modes and shuts
down the DSP circuits for the best stereo
sound quality.
SYNC
#
Stop playback of a BD or DVD.
EFFECT
;
Toggles pause and playback of current track.
SUB
%
Start recording (on products that have this
feature).
DISC MENU
i
Disc menu
POP UP
U
Activates BD/DVD player menu, if
available.
OK
Navigate setup and BD/DVD programme
selection menus.
O
selects the highlighted file or enters the
highlighted menu on the screen – equivalent
to ‘Enter’ or ‘Select’ on some remote
controls.
'
Up
<
Left
>
Right
,
Down
d
+
'
Power on from Standby
d
+
,
Standby from Power on
d
+
>
increases the picture resolution,
note for BD only on the home screen.
.
Returns navigation to the top level of the
menu (‘Home’).
AUDIO
g
Changes audio decode format (Dolby
Digital, DTS, etc).
SUBT
f
Cycles through subtitle options, if available.
A
Resets remote to AMP mode.
T
Displays programming screen on Arcam
DVD players.
x
Clears bookmark, search and programme
display entries on Arcam DVD players.
N
Displays the Memory function
(Bookmarks).
e
Displays Status Info on Arcam DVD
players.
P
Toggles power between standby and on.
(Some TVs require you to use a number key
to turn them on.)
0
…
9
Functions as original remote number key –
usually for channel selection.
D
Display INFO or OSD (On Screen Display)
function, if available.
RPT
M
AV, this function is TV specific.
TRIM
Y
Channel down
DIRECT
Z
Channel up
DISC MENU
i
Displays picture information, this function
is TV specific.
POP UP
U
Guide
OK
Navigate setup and programme selection
menus.
O
confirms a selection (equivalent to
‘Enter’ or ‘Select’ on some remotes).
.
Returns navigation to the top level of the
menu (‘Home’).
SUBT
f
Cycles through subtitle options, if available.
A
Resets remote to AMP mode
T
RED
key for Text TV
x
GREEN
key for Text TV
N
YELLOW
key for Text TV
e
BLUE
key for Text TV
AV Device Mode
The
a
Device Mode button configures the CR402 to
control the functions of a television or other display
device. You will need to configure this Device Mode to
work with your equipment. Pressing this button also
selects
AV
as the source.
