background image

2

Navigation keys

The Navigation keys steer the cursor in Setup menus 

or on-screen menus. They also replicate the navigation 

functions of original remotes supplied with other home 

entertainment devices in your system. 

O

 confirms a 

setting. 

Volume control

By default, the CR402 is set up so that the 

volume control and mute buttons (

"

/

 

and 

@

)) always control the volume of the 

AVR, regardless of which Device Mode the 

remote is currently set for. This is known as 

volume ‘punch through’. 

For example, if you are listening to a CD, you will 

probably have the CR402 in 

CD

 Device Mode to control 

the CD player. You can use the volume controls on 

the remote directly to adjust the volume of the AVR 

without first having to press 

A

 to put the remote into 

AMP

 Device Mode. The volume buttons ‘punch through’ 

the 

CD

 Device Mode on the remote to the 

AMP

 Device 

Mode.
Volume ‘punch through’ can be disabled individually for 

any Device Mode if desired.

Customising the CR402

The CR402 offers a Code Learning feature that allows 

you to copy functions from an original remote control 

onto the CR402 keypad. For details of this, and other 

customisation features, see “customising the CR402” on 

page 7.

Useful information

Backlight

A backlight comes on for eight seconds whenever a key 

is pressed. This helps you use the handset in subdued 

lighting conditions. 

Power LED blinks

A blink indicate a valid key press.
Multiple blinks convey information (such as a device 

code) or signal the beginning and successful completion 

of a programming sequence.
The symbol ‘

*

’ is used in the manual to indicate a 

power LED blink.

Timeouts and unassigned keys

Time out

 – After 30 seconds the CR402 exits the 

programming state and returns to normal operation.

Stuck key timeout

 – After any key is pressed 

continuously for 30 seconds, the CR402 stops sending 

IR transmission to conserve battery life. The CR402 

remains off until all keys are released.

Unassigned keys

 – the CR402 ignores any unassigned 

key presses for a particular Device Mode and does not 

transmit IR.

Low voltage indicator

When the batteries are running down, the LED flashes 

five times whenever you press a button:

*

 

*

 

*

 

*

 

*

If this happens, fit two new AAA alkaline batteries as 

soon as possible.

Device Mode / Source keys

As the CR402 can control your AVR as well as a range of 

other equipment: many of the buttons have more than 

one function depending on the ‘device mode’ selected 

on the remote control.
The Device Mode keys (shown below) select the source 

on the AVR. If one of these keys is pressed briefly, 

a command is transmitted to change the source on 

the unit. Also the functionality of the remote control 

changes to operate the selected source device; it’s like 

having a bundle of different remotes in your hand!

CR402

H

Multi-channel input

T

Internal FM or DAB tuner input

x

Auxiliary input

N

Ethernet input (e.g. Internet radio)

e

iPod, input

d

DVD or Blu-ray disc player

a

Audio-visual sound input (use with TV)

w

Video Cassette recorder input

E

Tape input

p

Phono input

z

Satellite input

v

Personal Video Recorder (or Digital 

Video Recorder) input

c

Compact Disc player input

Each Device Mode changes the behaviour of many 

of the CR402 keys to control the source device 

appropriately. For example: in 

CD

 mode 

Y

 plays the 

previous CD track, but in 

AV

 mode 

Y

 issues the TV 

‘channel down’ command.
The CR402 remains in the last selected Device Mode 

so it is not necessary to press a Device Mode key before 

every command key if all you are doing is playing or 

skipping tracks on a CD, for example.
Pressing the 

or 

keys will put the remote into 

AMP

 Device Mode. 

OK

The CR402 complies with Part 15 of the 

FCC rules

This equipment has been tested and found to 

comply with the limits for a class B digital device, 

pursuant to part 15 of the FCC Rules. These limits 

are designed to provide a reasonable protection 

against harmful interference in a residential 

installation. This equipment generates, uses, and can 

radiated radio frequency energy and if not installed 

and used in accordance with the instructions, 

may cause harmful interference to radio 

communications. However, there is no guarantee 

that interference will not occur in a particular 

installation. If this equipment does cause harmful 

interference to radio or television reception, which 

can be determined by turning the equipment off 

and on, the user is encouraged to try to correct 

the interference by one or more of the following 

measures: 
Reorient or relocate the receiving antenna. 
Increase the separation between the equipment and 

receiver. 
Connect the equipment into an outlet or a circuit 

different from that to which the receiver is 

connected. 
Consult the dealer or an experienced radio/TV 

technician for help.

Содержание CR402













Отзывы: