![background image](http://html.mh-extra.com/html/arcam/cr100/cr100_handbook_2963759017.webp)
E
n
g
li
s
h
CR100
E-17
<
To replace a learned function,
simply assign a new one to the
same key.
<
Learned functions
are
retained
when you change batteries.
<
If Code Learning fails, try altering
the distance between the two
remotes; make sure that the light
in the area is not too bright.
To delete a learned function:
1. Press and hold
�����
until the power
LED blinks twice:
.
3. Press
�
�
�
. The power LED
blinks twice:
.
3. Press a Device Mode key once.
For example, if you want to
delete one of your learned TV
functions, press
��
.
4. Press twice on the key you want
to deassign. The handset blinks
twice:
to confirm��
The original function of the CR100 is
restored.
To delete a Shifted Learned
function:
To delete a Shifted Learned function,
press
�����
before you press the key to
be deassigned (during step 4 above).
To delete aLL learned functions
within a given device Mode:
1. Press and hold
�����
until the power
LED blinks twice:
.
2. Press
�
�
�
– the power LED
blinks twice:
.
3. Press the appropriate Device
Mode key twice.
Creating Macros
You can program your CR100 to issue
a sequence of commands when you
press a single key. Any sequence of
commands you regularly use can be
reduced to a single key press for your
convenience.
For example, you might want to turn
off your TV, VCR and Satellite at the
same time.
<
A key programmed with a Macro
is available in all modes; it will
replace that key’s different
functions for all modes.
<
A Macro can consist of up to eight
key presses.
Example: To assign a Macro to
the
����
key
1. Press and hold
�����
until the power
LED blinks twice:
.
2. Press
�
�
�
.
3. Press
����
(the Macro will be
assigned to this key).
4. Press
��
,
,
���
,
,
���
,
.
(These are the Macro steps you
wish to record.)
5. To store the Macro, press and
hold
�����
until the power LED
blinks twice:
.
Now, whenever you press
����
, the
CR100 will toggle the power to your
TV, VCR and Satellite.
<
The important word here is
‘toggle’. For example, if the TV
and Satellite devices are currently
on, but the VCR is off, pressing
����
will switch off the TV and
Satellite and switch on the VCR
(rather than switching all three
devices on or off).
<
When using Macros, remember
that you may need to change
mode or use
�����
, and that each
key press (including changing
modes and pressing
�����
) counts
as one of the Macro steps. You
cannot use a Macro key within
another Macro.
<
If the amount of memory
storage for a particular Macro is
exceeded, the power LED comes
Содержание CR100
Страница 1: ...Handbook CR100 CR100 remote control English ...
Страница 41: ...CR100 41 ...