E-8
The CR108 remote
control
The CR108 is pre-programmed for use with the A19.
Make sure you have fitted the two AAA batteries
supplied before attempting to use the remote control.
1. With the CR108 remote face-down, press down
on the non-slip indentations of the battery
compartment cover and slide the cover off.
2. Insert the two ‘AAA’ batteries supplied. Take
care to insert the batteries in the right direction
by following the ‘+’ and ‘–’ marks in the battery
compartment.
3. Slide the battery compartment cover back and lock
it in place with a click.
The CR108 requires a clear line of sight to the front
panel display of A19 to ensure reliable operation.
remote
control
Amplifier commands
2
This toggles a powered-on A19 amplifier
between ‘standby’ and ‘on’ modes.
-
Toggles the mute function to silence
speaker output. The source is displayed on
screen followed by
Mt
(mute), when active.
VOL –
VOL +
Decrease (
VOL–
) and increase (
VOL+
)
amplifer volume
Source
keys
Selects the amplifier input:
BD
Blu-ray Disc or DVD input
PVR
Personal Video Recorder input
TUN
DAB/FM/AM tuner input
AV
AV (television sound) input
PHONO
Phono input
AUX
Auxiliary line input
CD
CD input
SAT
Satellite decoder input
BAL
Adjust balance levels (using
–
and
+
controls) between
L9
(left), through
0
, to
R9
(right)
DISP
Cycles through display panel brightness
options (bright, off, dim)
CR108
BD
PVR
AV
CD
TUN
PHONO
SAT
BAL
-
+
AUX
DISP
