Connect
Go to connect screen
Press Change Wi-Fi to find
device
Click on device (number as
label on end of unit)
Enter password 12345678
Return to Connect screen
Tick check box for device
Click Connect at bottom of
screen
Lighting
Allows use to set lightning
effects
Tap start and end times to set
duration
Use slider to set intensity
Tick Run Now check box to
preview
Click Save to retain settings
TIMER
Allows user to program on/off times
and % light output for each channel.
Up to 24 dimming points can be set.
Unit will dim up or down between
settings at a rate of 1% per 30 seconds.
It is advisable to write down times and
percentages required before setting
up program. Preprogrammed settings
are available for SPS and LPS corals.
Programs are displayed graphically and
can be previewed.
Click Timer + to add number of
dimming points
Press and hold time on each dimming
point to set time.
Press and hold channels to alter
percentage light out puts
Press eye symbol or use slider to
preview program
Press Save to confirm program. Program
will not be initiated until saved.
Press Schem to select a preset program
Manual
Allows user to set light level
for each channel to compare
colour combinations and
light levels. Unit returns to
programmed setting on exit
Tap channel to be changed and
use slider to set level
Manual
Allows user to set cloud effects
Tap start and end times to set
duration
Use slider to set intensity
Tick Run Now check box to
preview
Click Save to retain settings
SYSTEM
Update app
Update light software
Restore default - Returns unit
to factory defaults
Novice guide - Provides some
basic advice
FAQ
Lamp lights- Turns pilot light
on/off
DOWNLOAD APPLICATION
