This appliance must be earthed and the circuit must be protected by a suitable fuse!
Before installing, ensure that the rated voltage and frequency of the Luminaire match that of your power supply, and that the mains lead plug is fully
compatible with your mains supply socket. If in doubt, please return the unit to the point of purchase for verification.
This appliance should be earthed to minimise the possibility of electric shock. This appliance is equipped with an electric cord having an equipment earth wire
conductor and a grounding type plug. The plug must be plugged into a mains supply socket that is installed and earthed in accordance with all appropriate
codes and ordinances.
Ensure the mains cable has a ‘drip loop’ as shown in illustration 1.
Connect unit to power supply and mains as illustration 2.
PHYSICAL INSTALLATION
ELECTRICAL INSTALLATION
Select a suitable site close to your electricity supply. Do not connect appliance to the mains supply socket during installation. This appliance is for indoor
use only. Ensure the appliance is kept in a ventilated area and away from other heat sources. Make sure that the light from the appliance is aimed within the
aquarium.
CONSTRUCT IN SEQUENCE
CONSTRUCT IN SEQUENCE
NOT PROVIDED
MOUNT USING SUPPORT RODS
MOUNT USING SUSPENSION WIRE
1.
1.
3.
4.
5.
6.
7.
8.
2.
2.
3.
4.
5.
d.
c.
b.
a.
e.
f.
e.
a.
Insert legs into mounting brackets and tighten screws.
Slide legs into unit and mount on tank.
Tighten screws to lock legs in position
Minimum height above water 20cm
Ensure unit is supported while making connections.
Ensure all connections are secure before removing support
Minimum height above water 20cm
a.
b.
c. d.
f.
e.
2.
1.
5.
6.
3.
4.
1. Series 6 LED
2. Screw set
3. Suspension wire
4 Support rods
5. Support brackets
6. Power adapter
Illustration 2
