5692 FRESCA DRIVE, LA PALMA, CA 90623 | 800.585.5957 | ARCADIACONTRACT.COM
Step 3: Once back and seat cushions are removed, face the two seating units approximately 42.75” away
from each other (measurement is taken from the bottom front of both plinth bases). Align the wing
brackets on the seating units with the wing brackets on the back panel. Secure the seats to the back
panel by using (4) 5/16-18 x 2” hex bolts [D], two per seat from the inside of the seat. The bolts go
into pre-inserted t-nuts in the back panel (Figure C).
Step 4: Align the small accent tier attachment pins to the top of the seating unit bushings and push down to
secure. Next, insert the long accent tier by repeating the same process while at the same time,
aligning it to the small accent tiers with the four wing brackets, one per side (Figure D).
continued next page
FIGURE C
seating units
dimension taken
from here
back panel
FIGURE D
accent tiers
[D] 5/16-18 x 2” hex bolts, 4
