5692 FRESCA DRIVE, LA PALMA, CA 90623 | 800.585.5957 | ARCADIACONTRACT.COM
Step 8: Securing the unit using anchor bolts or sandbags is optional. Skip to Step 9 if neither is being utilized.
Make sure the accent tiers are perpendicular to the floor before starting. First, drill the floor using the
predrilled holes as guides. Affix (4) 3/8 x 5” anchor bolts [F], two per seating unit (Figure H). If using
sandbags, simply place them inside the seating units, two bags per side.
Step 9: To install the seats, tilt the seat slightly upward making sure the ¼-20 machine screws underneath the
seat cushion slide into the notches. Push the seat cushion down until it is flat against the seating unit
(Figure I).
Step 10: To install the backs, align the four z-brackets on the back rest with the four z-brackets on the seating
units and gently push down until the back is flat on the top of the seat (Figure J).
continued next page
FIGURE J
FIGURE H
FIGURE I
Accent tier should be
perpendicular to the floor
[F] 3/8 x 5” anchor bolts, 4
