Arca Flow 23013, Инструкция по установке и эксплуатации

Страница: 21 / 31

WEKA_IOM_VLI_EN / 17.03.2020 20 / 31
Gauge level different to surface of
the liquid (variation)
-
Deviation of several
centimetres
Incorrect float being used.
Float incorrectly in the standpipe.
Immersion depth of the magnet in
the float incorrectly calibrated. Check whether the correct float
has been used.
Check the orientation of the float
and rotate it if necessary.
Shift the magnet in the flat by
tapping the float on a soft pad
(rubber mat).
Colour combination displayed
incorrectly, e.g. red at the top
Indication rail installed the wrong
way around. Check the TOP sticker and rotate
the indication rail if necessary.
17. Label
17.1 Type plate
The visual level indicator may only be used for the purposes recorded on the type plate. The information
noted down on the type plate and data sheet must conform with ideal plant operating parameters.
Uses not intended by the manufacturer, modifications and alterations to the visual level indicator are at your
own risk and may be dangerous (guarantee exclusion).
17.2 Explosion-proof plate
The visual level indicator may only be used for the purposes recorded on the type plate and the Ex label.
18. Customer service
You can find a list of global WEKA representatives in your order confirmation or on the WEKA website,
www.weka-ag.ch
or you can contact us directly at
WEKA AG
Schürlistrasse 8
CH-8344 Bäretswil
Switzerland
Telephone
+41 (0)43 833 43 43
Email level@weka-ag.ch