Arca Flow 23013, Инструкция по установке и эксплуатации

Страница: 13 / 31

WEKA_IOM_VLI_EN / 17.03.2020 12 / 31
C) Float for top-of-tank designs
1. The float system for the top-of-tank design consists of a floatation body (called
a float here), the magnet holder and the rod that connects the two parts.
2. Type 23013:
The float moves along a guiding pipe and is fixed for transportation by a cable
tie against movement.
Type 25270:
The float is in the float chamber and is stopped from moving around thanks to
a screw at the bottom end of the chamber.
3. Type 23013:
Remove cable tie and dispose properly.
Type 25270:
Turn the screw until the float can move without too much resistance and move
the float further into the float chamber.
4. Bear in mind that the float can now move freely and may be damaged. You
should therefore now move the level gauge with all due care.
5. Type 25270:
Put the screw all the way back in and tighten it so that it can’t go missing. Now the float cannot
fall out.