manualshive.com logo in svg

ARC Flex 2JX, Руководство пользователя

Поделиться
Скачать
ARC Flex 2JX Скачать руководство пользователя страница 11

 

 

Page 10

2.7 BATTERIES 

  

WARNING 

KNOW AND FOLLOW PROPER BATTERY HANDLING, CHARGING AND DISPOSAL PROCEDURES. 
IMPROPER BATTERY PROCEDURES CAN CAUSE BATTERIES TO EXPLODE OR DO OTHER SERIOUS 
DAMAGE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY OR DEATH AND 
DAMAGE TO EQUIPMENT.

 

 

2.8 BATTERY HANDLING 

Use only battery packs provided by ARC for the specific product. 

Do not dispose of a battery pack in fire; it may explode.  

Do not attempt to open the battery pack.  

Do not short circuit the battery. 

Keep the battery pack environment cool during charging operation and storage (i.e., not in direct sunlight or close 
to a heating source). 

 

2.9 BATTERY CHARGING 

For those transmitters equipped with battery chargers, please familiarize all users with the instructions of the 
charger before attempting to use.  

Do not attempt to charge non-rechargeable battery packs. 

Avoid charging partially discharged rechargeable batteries to help prolong battery cycle life. 

Avoid charging the battery pack for more than 24 hours at a time. 

Do not charge batteries in a hazardous environment.  

Do not short the charger unit.  

Do not attempt to charge a damaged battery.  

Use only ARC charger unit for the appropriate battery pack. 

Do not attempt to use a battery pack that is leaking, swollen or corroded. 

Charger units are not intended for outdoor use.  

 

2.10 BATTERY DISPOSAL 

Before disposing of battery packs consult local and governmental regulatory requirements for proper disposal 
procedure.  

 

2.11 SPECIFIC SYSTEM WARNINGS

 

Below are some specific operating safety tips that should be strictly followed when operating a Flex 2JX system: 

1. 

Check the Status LCD on the transmitter for any signs of low battery power. 

2. 

Check the Status LCD on the transmitter for any signs of irregularities.  

3. 

Make sure the system is not set to the same channel as any other Flex systems in use within a 

distance of 300 meters (900 feet).   

4. 

Never operate equipment with two transmitters at the same time unless they are programmed to 

do so.

 

Содержание Flex 2JX
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды