ARC ACS6SE2 Скачать руководство пользователя страница 7

ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual 

  7 

   

   

   

Turning   on   an   element   and   setting   a   power   level   

   

   

   

 

Turn   the   control   knob   of   the   zone   that   you   wish   to   cook   on,   clockwise   or   anticlockwise   until   it   
reaches   the   power   level   that   you   desire.   

 

Each   cooking   zone   can   be   adjusted   between   1   and   6,   one   being   the   coolest   zone   setting   and   
six   being   the   hottest   zone   setting.   

 

When   you   have   finished   cooking,   make   sure   that   you   turn   the   control   knob   anti-­‐clockwise,   to   
the   0   position.   

   

Hob   guidelines   

 

The   first   few   times   the   hob   top   is   used,   it   may   give   off   an   acrid,   burning   smell.   This   smell   will   

disappear   completely   with   repeated   use.   

 

The   hob   surface   is   fitted   with   cooking   areas   of   different   diameter   and   power.   

 

You   should   not   use   saucepans   with   rough   bottoms,   as   this   can   scratch   the   solid   plates.   

 

Before   use,   make   sure   that   the   bottoms   of   the   saucepans   are   clean   and   dry.   

 

When   cold,   the   bottom   of   the   pans   should   be   slightly   concave,   as   they   expand   when   hot   and   
lie   flat   on   the   surface   of   the   hob.   This   will   allow   the   heat   to   transfer   more   easily.   

 

The   best   thickness   for   the   bottom   of   the   pans   is   2   –   3   mm   of   enameled   steel   and   4   –   6   mm   for   
stainless   steel   with   sandwich   type   bottoms.   

 

If   these   rules   are   not   followed,   then   there   will   be   a   great   loss   of   heat   and   energy.   Heat   not   
absorbed   by   the   saucepan,   will   spread   to   the   hob,   frame   and   surrounding   cabinets.   

 

Preferably   cover   pans   with   a   lid   to   permit   cooking   at   a   lower   heat   setting.   

 

Always   cook   vegetables   and   potatoes,   etc.   in   as   little   water   to   reduce   cooking   times.   

   

CLEANING   &   MAINTENANCE   

Cleaning   and   maintenance   operations   must   only   be   carried   out   when   the   cooktops   

is   cool.   

The   appliance   should   be   disconnected   from   your   mains   supply   before   commencing   

any   cleaning   process.   

   

   

Cleaning   the   hob   top   

Any   residues   that   are   left   on   the   hob   top   surface   from   cleaning   agents   should   be   removed   

thoroughly.   You   should   remove   any   residues   with   water   and   a   little   washing   up   liquid.   

   
Abrasive   cleaners   or   sharp   objects   can   damage   the   hob   surface;   you   should   clean   it   

using   water   and   a   little   washing   up   liquid.   

Содержание ACS6SE2














Отзывы: