ACS6SE2 and ICS6SE3 60cm Cooktop Installation and Operation Manual
11
out.
•
On the underneath of the hob, adjust the clamps into a position that is suitable for your worktop.
Then fully tighten the screws
(C)
to secure the hob into position.
Electrical connection
This appliance must be installed by a qualified person.
Before connecting the appliance, make sure that the supply voltage marked on the
rating plate corresponds with your mains supply voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
•
This appliance must be wired into a 30 A double pole switched fused spur outlet, having 3 mm
contact separation and placed in an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m away from it.
•
The spur outlet must still be accessible even when your oven is located in its operating position.
•
Cable type: H05 RRF 3 core x 2.5 mm²
Connecting the mains supply cable
•
The mains terminal block is located on the underside of the hob and the terminals are accessible
by removing the terminal block cover by removing the cover screw.
•
The cable connections must be in accordance with the diagram located on the bottom of the hob.
