8 Operation (cont’d)
DIAMOND BLADE & MINI INDUSTRIAL
BLADE
Required Stepwasher
To change blades with Diamond or Mini
Industrial Blade follow step 1 as for
BLADES on OPERATION ( page 7 ) to
remove blade (seen in fig .5) then unscrew
the cutter clamping bolt by using the Allen
key provided and remove blade (as shown
in fig 6)
Fitting Instruction as below
(These instructions are identical for fitting
the diamond blade)
There is a brass seating washer loosely fixed
to the underside of this cutter. It positions
the cutter forward to prevent collision with
the inside face of the guard. Please ensure
it is fitted on the correct side of the cutter as
shown in the diagram.
( as shown in fig 10)
Fig.8
Fig.9
Step Washer
Step Washer
Supplied with the
Mini Grinder
Fig.10
