12 Maintenance
Fig.19
Not tensioned
Fig.18
Small
Pulley
Fig.20
Tensioning or replacing the belt
•
Unplug the Mini-grinder
•
Remove the 4 belt tensioning cap screws (shown in fig. 18).
•
To remove top cover , remove the 3 cover screws (see knowing your tool page
5) then slide cover back away from blade and lift off.
•
Rotate tensioning cap Fig 18 to remove slack from the belt fig 19. The blade
can be seen moving slightly when rotating the Belt tensioning cap.
•
When tensioned secure with top cover screws.
DO NOT OVER TENSION THE BELT
If replacing the belt ensure that the “V” shape sides of the belt are on the inside (as
shown in fig.20). Replacement belts (MIN.FG.003) are available through Arbortech
Pty Ltd
(see address on back).
Note: clean surroundings with a soft cloth or small brush.
Belt
Tensioning Cap
“V” Belt
Guard
Slack removed and tensioned
