Maintenance 11
•
Blade sharpening - Mini Grinder Blade:
1. Unplug the Mini Grinder.
2. Use a (5/32´´) or 4 mm round metal file (MIN.
FG.002). When sharpening hold the file at 90
0
to
the blade, keeping the file level.
(as shown in fig.15)
•
Checking adaptor plate
Ensure that the Mini-Grinder adaptor plate is
always mounted securely. If loose, tighten the
three adaptor plate screws as shown in fig.16.
Note: The arm must be removed to be able to
tighten the adapter plate screws to the casting of
the grinder
Fig.15
Fig.16
90
o
Sharpening Angle
Cleaning the grills and switch
Regulary check to see if any dust or foreign
matter has entered the grills positioned on the
front and back of the motor or under the switch
(as shown in fig.17). If so use a soft brush to
remove any accumulated dust to clean grills and
switch.
Fig.17
WARNING
ALWAYS USE EYE PROTECTION
ALWAYS UNPLUG FROM THE WALL WHEN CLEANING
