Arbor Technology Rigid-772 Скачать руководство пользователя страница 91

Страница: 91 / 113

- 79 -

BIOS

5.2.2. SS RTC Wake Settings

Access this submenu to configure whether and when to awake the system.

The featured settings are:

Setting

Description

Wake System

with Fixed Time

Sets if to awake the system at a defined moment.

Options available are

Enabled

and

Disabled

(default).

Enable this feature to awake the system at a defined

moment in time. When enabled, the following settings

become available:

Setting

Description

Wake up hour

Defines the (hour) time to awake the

system.

0 to 23 configurable.

Wake up minute

Defines the (minute) time to awake

the system.

0 to 59 configurable.

Wake up second

Defines the (second) time to awake

the system.

0 to 59 configurable.

Wake System

with Dynamic

TIme

Sets if to awake the system some time in the future.

Options available are

Enabled

and

Disabled

(default).

Enable this feature to awake the system some time from

now. When enabled, the following setting becomes available:

Setting

Description

Wake up minute

increase

Defines how long from now to awake

the system.

1 to 5 minutes configurable.

Содержание Rigid-772


















































































































Результаты поиска

Содержание Rigid-772

Отзывы:

Похожие инструкции для Rigid-772

Бренды по названию

Популярные бренды

Arbor Technology Rigid-772, Руководство пользователя

Результаты поиска

Содержание Rigid-772

Отзывы:

Похожие инструкции для Rigid-772

Бренды по названию

Популярные бренды