manualshive.com logo in svg

Arbor Technology Rigid-772, Руководство пользователя, Страница: 56 / 113

Поделиться
Скачать
Arbor Technology Rigid-772 Скачать руководство пользователя страница 56

- 44 -

Installation & Maintenance

4.1. Install Hardware

The computer is constructed based on modular design to make it easy for 

users to add hardware or to maintain the computer. The following sections will 

guide you to the simple hardware installations for the computer.

4.1.1. Open the Computer

For the computer, removing the top and bottom covers is essential to open the 

computer and access the inside. Follow through the steps below to remove the 

top cover and bottom cover from the computer.

4.1.1.1. Remove Top Cover

All jumpers, MiniCard socket, SDRAM SO-DIMM slots, DIO port and PIO 

port (printer port) are built on the top side of the main board. To access these 

components, the computer’s top cover has to go. Follow through the steps 

below to remove the top cover.

1. 

Place the computer on a flat surface. Loosen and remove the 6 screws as 

marked in the illustration below.

Содержание Rigid-772


















































































































Отзывы:

Нет отзывов