Arbor Technology M1858C, Руководство пользователя

Страница: 62 / 84

- 46 -
BIOS
4.3.3 Super I/O Configuration
Access this submenu to configure the system’s serial port.
Serial Port 0 Configuration
Serial Port 1 Configuration
Power On after Power Fail
[Power off]
Super IO Configuration
Super IO Chip W83627H
Set Parameters of Serial Port
0 (COMA)
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Advanced Chipset Boot Security Save & Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main
→←
: Select Screen
↓↑
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
The
Super IO Configuration
screen provides the following setting options:
Settings Descriptions
Serial Port 0/1
Configuration
Configures the system’s serial port (COM port). The settings
include:
Serial Port: Enables/disables the serial port.
Options: Enabled [default], Disabled
Device Settings:
Shows the I/O and IRQ address of the
COM port.
Change Settings: Select an optimal setting for Super IO
device.
Power On After
Power Fail
Specify what state to go to when power is re-applied after a
power failure.
Options:
Power off
[default],
Power on