Arbonia DCB Series, Руководство по установке и обслуживанию

Страница: 46 / 84

46
English
The T–MB is a wall-mounted controller that can be
connected to DCB-W and DCB-E air cutain unit fitted
with the SELV electronic board.
– GENERAL NOTES –
- T-MB WALL-MOUNTED
CONTROLLER
(
CODE
ZE0161 00011)
Fig.1
M Fan
+
°C
SET
7
6
5
9 8
10
11
1
2
3
4
The controller features the following functions (Fig. 1):
1 - switch the appliance on and off
2 - set the fan speed
3 - temperature set
4 - setting the operating mode
Segnalazioni del Comando (Fig. 1):
5 - Only Fan
6 - Heating with maximum power of the Electrical
resistance (DCB-E)
7 - Heating with On / Off valve
(DCB-W)
Heating with minimum power of the Electrical
Resistance
(DCB-E)
8 - Environment temperature measured / SET / OFF
9 - Set Ventilation
10 - Clock
11 - Timer active
READ
THIS USER MANUAL CAREFULLY
BEFORE
INSTALLING AND USING
THE CONTROLLER
CONTROL INSTALLATION
Separate the front of the controller from the rear plate by
using a screwdriver to press the locking tongue on the
top of the controller.
Place the rear plate on the wall and mark the mounting
holes. Drill the holes, insert the screw plugs in the wall
and fasten the plate with screws.
Make the electrical connections as shown in the wiring
diagram on the following page.
84 mm
60 mm
DCB-W / DCB-E