ARB RD121, Инструкции по установке

Страница: 14 / 40

3 Installing the Air Locker
12
3.4
Installing the Carrier Bearings
c
Apply a thin film of high pressure grease to both bearing journals of
the
Air Locker.
c
Using a bearing press or arbor press, press one of the original
tapered roller bearing cones onto the bearing journal opposite to
the ring gear flange of the differential carrier (As shown in Figure 4.)
until the bearing seats firmly against the bearing journal shoulder.
Figure 4.
c
Invert the Air Locker and press the second bearing cone onto the
bearing journal on the ring gear flange side of the differential (the
seal housing side) until the bearing seats firmly against the bearing
journal shoulder.
NOTE : Never re-use any bearings which are damaged or
worn. Do not add any shims between the seal
housing bearing and the bearing seat.