17-06-2014 Page 12 of 14 ARB Copyright 2014
3789276
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC:
42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:
(08) 9244 3553
NSW:
(02) 9821 3633
ACT:
(02) 6280 7475
SA:
(08) 8244 5001
QLD:
(07) 3872 3872
NT:
(08) 8947 2262
TAS:
(03) 6331 4190
Operations Manual ARB “Simpson” Tent
1. Remove the Annexe from it
‟s bag and unzip the back panel from the rest of the
Annexe if necessary. This is the panel with a large inverted U-shaped zip for access
to the vehicle. Slide the rope section of this panel into the rope
track extrusion situated on the base of the tent. See
1
2. Tension the back panel and peg to the ground ensuring that the mud flap
skirt is taught. See
2
3. Using the large section of the Annexe thread the rope section of each side into
the appropriate side of the rope track extrusion on the base of the tent.
See
3
4. Thread the remaining short piece of rope section around the corner piece
into the rope track on the front of the base. See
4
5. Engage the zip sewn on the veranda skirt with the half of the zip on the
annexe and zip completely around the veranda section of the tent. See
5
6. Engage the side zips that attach the back panel with the side walls of the
annexe, and zip down to the ground. See
6
7. Arrange and secure the mud flaps with the pegs provided. See
7
8. Square out the floor of the annexe and peg into the ground using the
supplied pegs, using the strap adjustors to tension the annexe. See
8
Note:
- The annexe can be used without the back panel.
- The annexe is stored separately in its own bag.
