17-06-2014 Page 1 of 14 ARB Copyright 2014
3789276
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC:
42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:
(08) 9244 3553
NSW:
(02) 9821 3633
ACT:
(02) 6280 7475
SA:
(08) 8244 5001
QLD:
(07) 3872 3872
NT:
(08) 8947 2262
TAS:
(03) 6331 4190
ARB Rooftop Tent & Mounting Brackets
Please disregard instructions supplied with tent
Installation Time: Approx. 1.5 hours approx.
! PLEASE PROVIDE A COPY OF THESE INSTRUCTIONS TO THE CUSTOMER !
IMPORTANT:
Read all instructions and check fitting kit contents before starting
This product can only be fitted to vehicles with a roof load rating of 100 kg or greater
If you are unsure at any point of fitting. Please contact your ARB dealer for advice.
Fitment can be undertaken with one person, however at least two people or a required to lift the tent into
place
Kit 4100005 is only for use on cross bar types Thule Aero, Thule Wing, Thule Professional & Rhino Vortex
Kit 4100006 is only for use on cross bar types Thule Square bar & Rhino Heavy Duty
CARE OF YOUR TENT:
Please refer to the “Owner’s Manual” section at the end of this document. This should be given to
the purchaser after fitting
WARRANTY:
Please refer to ARB “Warranty against defects” booklet available from your dealer. A copy of this
booklet should be given to the customer.
SAFETY:
The ARB roof top tent mounting brackets must only be used for ARB tents. Use of these brackets for
use other than intended may lead to product failure and pose a serious safety risk.
Fitment must be followed as per instruction, ensuring all bolts are tightened correctly. Failing to
install correctly may lead to product failure and pose a serious safety risk.
