5
INITIAL SET UP
(1) Turn on the device – the power switch is situated at the bottom, next to the USB port. You should
now see the main screen. If no sensors are attached only the atmospheric pressure readings will
be displayed. In the upper right corner the settings menu icon
is located.
(2) Attach the power supply to one of the two USB ports, depending on how the device will be
positioned. In case it will be placed on a flat surface attach the included stand to the device. Once
it is done the battery icon in the middle of the top row of the main screen will be changed to a
plug icon.
(3) Before adding sensors, tap then Time menu. Set correct time and date – it will ensure that the
data is represented correctly. Tap
to return to the main menu or back to return to settings
menu.
