background image

2

8 0 0 8   A N D   I R I D I U M   U S E R   G U I D E

©2012 Indy Audio Labs, LLC all rights reserved / Revision20130220

Document No. 1000571

1.  Read Instructions – All safety and operating instructions should be 

read before operating the device. 

2.  Retain Instructions – The safety and operating instructions should  

be retained for future reference. 

3.  Heed Warnings – All warnings on the device and in the operating 

instructions should be adhered to. 

4.  Follow instructions – All operating and safety instructions should  

be followed. 

5.  Attachments – Do not use attachments not recommended by the 

product manufacturer as they may cause hazards. 

6.  Water and Moisture – Do not use this product near water (for 

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; 

in a wet basement; or near a swimming pool; and the like). 

7.  Ventilation – Slots and openings in the cabinet are provided for 

ventilation and to ensure reliable operation of the product and to 

protect it from overheating, and these openings must not be blocked 

or covered. The openings should never be blocked by placing the 

product on a bed, sofa, rug, or other similar surface. This product 

should not be placed in a built-in installation such as a bookcase 

or rack unless proper ventilation is provided or the manufacturer’s 

instructions have been adhered to. 

8.  Heat – This product should be situated away from heat sources 

such as radiators, heat registers, stoves, or other products that 

produce heat. 

9.  Power Sources – This product should be operated only from the  

type of power source indicated on the marking label. If you are not 

sure of the type of power supply in your home, consult with your 

product dealer or the local power company. For products intended  

to operate from battery power, or other sources, refer to the 

operating instructions. 

10. Grounding – This product is equipped with a three-wire grounding- 

type plug, a plug having a third (grounding) pin. This plug will only 

fit into a grounding-type power outlet. This is a safety feature. If you 

are unable to insert the plug into the outlet, contact your electrician 

to replace your obsolete outlet. Do not defeat the safety purpose of 

the grounding-type plug. 

11. Power Cord Protection – Power supply cords should be routed so 

that they are not likely to be walked on or pinched by items placed 

upon or against them, paying particular attention to cords at plugs, 

convenience receptacles, and the point where they exit from  

the product. 

12. Overloading – Do not overload wall outlets, extension cords, or 

integral convenience receptacles as this can result in a risk of fire or 

electrical shock. 

13. Lightning and Periods of Non-Use – For added protection for this 

product during a lightning storm, or when it is left unattended and 

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

RISK OF ELECTRIC SHOCK! 

DO NOT OPEN!

CAUTION!

 To reduce the risk of electric shock and fire, do not remove the cover or back plate of the device 

enclosure. There are no user serviceable parts inside. Refer servicing to an Aragon authorized service center.

CAUTION!

 The international symbol of a lightning bolt inside a triangle is intended to alert the user to 

uninsulated “dangerous voltage” within the device enclosure. The international symbol of an exclamation 

point inside a triangle is intended to alert the user to the presence of important operating, maintenance and 

servicing information in the manual accompanying the device.

WARNING!

 To reduce the risk of fire or electrical shock, do not expose this equipment to rain or moisture.

unused for long periods of time, unplug it from the wall outlet and 

disconnect the antenna or cable system. This will prevent damage 

to the product due to lightning and power line surges.

14. Cleaning – Unplug this product from the wall outlet before cleaning. 

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth 

for cleaning.

15. Object and Liquid Entry – Never push objects of any kind into this 

product through openings as they may touch dangerous voltage 

points or short-out parts that could result in a fire or electric shock. 

Never spill liquid of any kind on the product.

16. Damage Requiring Service – Unplug this product from the wall outlet 

and refer servicing to qualified service personnel under the following 

conditions: a) When the power supply cord or plug is damaged,  

b) If liquid has been spilled, or objects have fallen into the product, 

c) If the product has been exposed to rain or water, d) If the product 

does not operate normally by following the operating instructions. 

Adjust only those controls that are covered by the operating 

instructions as an improper adjustment of other controls may result 

in damage and often will require extensive work by a qualified 

technician to restore the product to its normal operation, e) If the 

product has been dropped or damaged in any way, or f) When the 

product exhibits a distinct change in performance – this indicates a 

need for service.

17. Replacement Parts – When replacement parts are required, be sure 

the service technician has used replacement parts specified by the 

manufacturer or that have the same characteristics as the original 

parts. Unauthorized substitutions may result in fire, electric shock, 

or other hazards.

18. Safety Check – Upon completion of any service or repairs to this 

product, ask the service technician to perform safety checks to 

determine that the product is in proper operating condition.

19. Servicing – Do not attempt to service this product yourself as 

opening or removing covers may expose you to dangerous voltage 

or other hazards. Refer all servicing to qualified service personnel. 

If this unit is purchased outside of the U.S., please contact your 

local dealer or distributor for service center information. If purchased 

inside the U.S. and dealer service is not available, contact Aragon 

Customer Service for a return authorization (RA) number before 

shipping. For further service information, contact:

     ARAGON CUSTOMER SERVICE

      phone: 1-866-781-7284
      email: [email protected] 
      5225 EXPLORATION DRIVE
      INDIANAPOLIS, IN 46241

Содержание 8008

























Отзывы: