54
13.5
Boom section management
AUTOMATIC MANAGEMENT ON
AUTOMATIC MANAGEMENT OFF (MANUAL)
The section valves are closed or opened automatically.
Section valves must be opened or closed manually.
To change section valve management mode, use function
Automatic section management ON/OFF (par. 13.4).
SPRAYING AND BOOM SECTION STATUS
Main control
OFF
Sections
OFF
Main control
OFF
Sections
ON
Section
ON
Section
OFF
Zone to be sprayed.
OPEN SECTION
Zone already sprayed.
CLOSE SECTION
OPENING AND CLOSING SIGNALS
MANUAL MANAGEMENT OF THE SPRAYING POINTS
When overlapping is above the set value for the
Sections overlapping limit
(par. 11.4.11), the monitor warns that the relevant spraying points must be CLOSED (Fig. 130).
Close the valves through the relevant controls: the monitor will confirm closure on display.
As the machine advances, the signal is triggered for each valve.
When overlapping returns within the set limit, the monitor warns to OPEN the relevant spraying points (Fig. 131).
Open the valves through the relevant controls (par. 12.2): the monitor will confirm opening on the display. As the machine advances, the signal is triggered for each valve.
Closing signal
Opening signal
Fig. 130
Fig. 131
AUTOMATIC MANAGEMENT OF THE SPRAYING POINTS
When overlapping ONE or MOIRE spraying points is above the set value for the
Sections overlapping limit
(par. 11.4.11) the monitor CLOSES the relevant valves
(Fig. 132). It is not necessary to intervene on the controls.
The monitor closes the sections automatically. Spraying interruption is shown on the display in real time.
When overlapping returns within the set limits, the monitor opens the relevant valves automatically. Spraying resumption is shown on the display in real time (Fig. 133).
Automatic section closing
Automatic section opening
Fig. 132
Fig. 133
“AUTOMATIC FUNCTIONS”
