22
Par.10.2
Shifting
of the cursor
Quits the menu or
the data change
Confirms access to menu
or data change
Menu item scrolling or
Data increase/decrease
11.11
Flowmeter constant
Flowmeter
2271 pls/gal
Fig. 46
This parameter sets the flowmeter constant value: it indicates how many pulses are sent by the flowmeter per unit of
sprayed fluid.
The constant value is indicated on the label on your flowmeter.
For the parameter value of ORION flowmeters only, to be entered in the computer, refer to section "Technical data" of
the User manual attached to the flowmeter.
11.12
Pressure sensor
Pressure sensor
Disabled
Fig. 47
Indicate the full scale of the pressure sensor installed on the system.
If there is no pressure sensor, set item
Disabled
.
11.13
Flow calculation
*
Flow calculation
Flowmeter
Fig. 48
Set the type of sensor to be used to calculate the rate:
>
Flowmeter
Pressure sensor
Flowmeter const.
par. 11.11
Pressure sensor
par. 11.12
* MENU VISIBLE ONLY WITH SPECIFIC SETTINGS:
TO VIEW IT, ENABLE BOTH THE INDICATED OPTIONS
11.14
Press. calc.
*
Press. calc.
No
Fig. 49
This parameter allows deciding whether you want to display a pressure value in the
Spraying menu
calculated
according to the rate detected by the flowmeter and the selected nozzle.
>
No
Yes
Pressure sensor
par. 11.12
* MENU VISIBLE ONLY WITH SPECIFIC SETTINGS:
to display it you must disable the shown option.
11.15
Nozzle qty
*
Nozzle qty
40
Fig. 50
This parameter allows setting the total number of nozzles installed on the boom.
With this parameter BRAVO 180S calculates the system pressure according to the rate detected by the flowmeter, or
the system rate based on the pressure detected by the relevant sensor (according to the device being used, par. 11.13).
Flow calculation
>
Pressure sensor
par. 11.13
Press. calc.
par. 11.14
* MENU VISIBLE ONLY WITH SPECIFIC SETTINGS:
TO VIEW IT, ENABLE ONE OF THE INDICATED OPTIONS
ADVANCED SETUP
Содержание Bravo 180S Series
Страница 41: ...Notes 41...
