Arada Farringdon 8, Руководство по эксплуатации и установке, Страница: 10 / 28

Arada Farringdon Page 10
INSTALLATION
FITTING THE FLUE OUTLET AND
HOT PLATE
The flue outlet spigot and hot plate (blanking plate)
is found packed inside the appliance.
A section of self adhesive sealing rope and fixings
are also supplied. The sealing rope needs to be
positioned around the outer circumference of both
the flue outlet spigot and hot plate, as shown in
Fig. 1a.
Fit the flue outlet to the appliance in the desired
position and secure with the washers and nuts pro-
vided.
Similarly, fit the hot plate (blanking plate) to the
unused opening.
If required fire cement may be used if so, clean off
any surplus fire cement.
Place appliance on the hearth and make sure that
it is level and does not rock.
Connect the chimney ensuring all joints are sealed
with fire cement.
Note : The flue pipe must be fitted inside the flue
outlet spigot. Failure to do so could result in the
spillage of condensation running down the flue.
( See Fig. 1b )
Fig. 1b. Flue & Spigot Fitting
Flue
Outlet
Spigot
Flue
Pipe
Inside
Fig. 1a. Adhesive Rope Fitting
Self-adhesive rope