DiscGlo Operating Manual
27
7.3 Installing a Dollar Bill Accepter
The DiscGlo comes Bill Accepter ready. Simply plug
the
Bill Accepter wires into the coindoor harness andplug in
the power cable into the Distribution Box.
7.5 Opening the Playing Surface
I
playing surface.card or get into the n order to change
components, add a modem, network
Setup Mode
, you will
need to open the
231. Lift up the playing surface and slide toward you. The .
Put both hands to the side of the playing surface.You .
Carefully slide back the playing surface about an inch.. Use
your key and unlock the playing surface in the the playing
surface on so that you don’t have to DiscGlo cabinet has
notches that allow you to rest should feel a hand hold on
each side.remove it completely from the game.front. After
unlocking, remove the key.
4
Playing Surface
Cabinet
7.6 Puck Maintenance
There are just a few considerations:The DiscGlo puck
shouldn’t need much maintenance.
⬧⬧
Do Not Oil the
BearingKeep bearing free from debris. Use rubbing alcohol
need lubricant.and compresed air to clean the bearing.. The
Bearing does not
⬧
Keep the bearing dry.
7.7 Playing Surface Maintenance
on the playing surface. nance. Unlike other shuffleboard
machines, you won’tThe DiscGlo playing surface shouldn’t
need much mainte-need to wax, polish or put any kind of
lubricating material
any multi purpose cleaner and a paper towel to clean theIt
will, however, need to be kept clear of any messes.
Useplaying surface.
Section 8
Collector Menu
The Collector Menu is a quick way to access several
operatorfunctions of the DiscGlo. From this menu you will be
able toforce a call, access the setup menu and view collector
reports.
DiscGlo
Dollar Bill
Acceptor
