PY500AC SLIDING GATE OPERATOR
6
M6X10
Fig.6
Manual operation
In case of power failure use key unlock the lock and pull down the release bar about 90 degree to open
or close gate manually, use the release key as follow:
�
Fit the supplied key in the lock.
�
Turn the key and pull down the release bar about 90
°
to release the gear. (Note: Do not exceed 90°,
be careful not to use too much force, otherwise the release bar will be damaged.)
�
Open and close the gate manually.
Note: If the gate bumps the mounting post and cannot be electric opened, move the gate a few inches by
hand, thus you can release the gate with the key, open and close the gate manually.
Fig.7
6.
6.
6.
6. Wire
Wire
Wire
Wire Connecting
Connecting
Connecting
Connecting
Make sure that the power is OFF before making any electrical connections.
Remove the cover, perform the wiring (See Fig.8 and wiring notes for control board) and replace the cover
again.
