106
- We enter into stand-by programming. limits the
maximum temperature of the air / water exchanger.
107 - We select temperature.
108 -We increase temperature.
109 - If this temperature is equalized or exceeded,
the stove will turn off again when the temperature is
lower than the programmed value. We confirm
temperature.
110 - We left standby programming.
111 - We enter fuel selection.
112
-We select pellets.
113 - We enable selection.
114 - We select through the "olive bone" increment
key.
115 -We confirm "olive bone".
116 - We left the fuel selection.
117 - We select menu 1 - 11.
118
-Not used. We select menu 1-12.
119
- Not used. We select to recover
data.
15
